PACIFIC

QS-12 QUICK SCRUB

REPLACE THE MOP & BUCKET

The Quick Scrub replaces the mop, bucket, and wringer and the need for scheduled restorative cleaning. Featuring patent pending innovations for increased speed and performance, this daily clean machine is the industry’s only solution to cleaner, safer, and soil-free tight space environments.   No longer is there a need for wet floor or area closed signs. 


SOLUTION CAPACITY: 5.5 gallons / 20.8 liters
RECOVERY CAPACITY: 6.0 gallons / 22.7 liters
CLEANING PATH WIDTH: 12 inches / 30.5 cm
RUN TIME: Up to 3.5 hours
BATTERY TYPE: 26Ah or 61 Ah TPPL

  • A daily use machine.
  • Small, compact for confined spaces.
  • Clean under hard to reach areas.
  • Keeps areas open for use while cleaning.
  • No more labor intensive mops and buckets.
  • Uses only clean solution on the floors, no more spreading dirt.
  • No need for restorative cleaning.
  • Optional caddy provides supplies to restock areas.

Cleaner, safer, and healthier spaces start with Pacific’s Quick Scrub.  The Quick Scrub is the daily clean replacement for the mop and bucket and high pressure wash restorative systems with the industries only true answer to hygiene, ease of use, productivity and lowering cost to clean.

Clean Under Equipment

Scrub & Recover

Spill Clean & Recovery

Bathroom Cleaning

Previously Mopped Floor

EASY OPERATION

Simple Icon Based Operation Guide

1. FILL

Fill the Solution Tank with fresh water using the Solution Tank fill ports located on the front (under the Cover Assembly) or rear of the machine. Water temperature should not exceed 120°F (50°C). If the Q-CAPS™ chemical system is being utilized, install the appropriate Q-CAPS™ container at this time.

2. POWER ON

Turn the machine on using the On/Off switch located on the Operator Control Panel.

3. REMOVE HANDLE

Remove the Handle–Scrub Brush Assembly from its storage area.

4. SCRUB

With the scrub brush (or scrub pad) facing downwards, depress the solution trigger located on the handle. Apply enough solution to adequately wet the area to be cleaned. Note: To prevent slip and fall accidents, it’s best to clean larger areas in small sections.

5. RECOVER

Once the area has been throughly scrubbed, flip the Scrub Brush Assembly over so that the squeegee is facing downwards. Vacuum until the area is dry.

6. STORE HANDLE

Return the Handle–Scrub Brush Assembly to the storage area. Note: The Handle-Scrub Brush Assembly may retain a small amount of recovered solution. Storing the assembly before turning off the machine ensures this liquid drains into the storage area instead of draining onto the clean floor.

7. POWER OFF

Turn the machine off using the On/Off switch located on the Operator Control Panel.

8. DRAIN

Using the Recovery Tank Drain Hose located on the rear of the machine, empty the recovered solution into an approved drain or slop sink.

Q-CAPS™

Q-CAPS™ is designed to work with Pacific's Quick Scrub machine.   It is a simple, no nonsense approach to using the right amount of chemical every time.

Q-CAPS™ is currently offered in three formulas for specific applications:

  1. Linpol Gloss - Use for general daily floor cleaning.
  2. Industry - Power cleaner and degreaser.   Ideal for kitchen and food-prep areas where fats and greases are present in food production.
  3. Enzysan - Probiotic surface cleaner and deodorizer.   Designed for restrooms and other areas where bacterias are a concern.

 

Q-CAPS™ is ready to use in the Quick Scrub with only two simple steps!

Clean solution AND the correct dilution ratio applied every time!

 

LINPOL GLOSS

Specifically formulated to clean and protect floors where high-gloss levels are required.  A daily use cleaner.

INDUSTRY

Food safe heavy duty surface & floor degreaser.  For the removal of organic & mineral oils and grease.

ENZYSAN

Probiotic all surface cleaner and deodorizer.  For the cleaning and deodorizing of restroom floors and drains.

PACIFIC

QS-12  QUICK SCRUB Specifications


Print Specifications

Model Specifications: Pacific QS-12 QUICK SCRUB

6 GALLON QUICK SCRUB SPECIFICATIONS
Features Specifications
Model QS-12
Machine Specifications
Length 24 in ( 61 cm)
Width 19 in ( 48.3 cm)
Height 36 in ( 91.4 cm)
Weight w/ Std Batteries 110 lbs (49.9 kg)
Weight w/ Opt’l Batteries 131 lbs (59.4 kg)
Sound level 68 dBA
Construction Rotationally molded polyethylene tanks, powder coated steel frame
Solution Delivery System
Solution Capacity 5.5 gal (20.8 L)
Solution Control 0.0 - 0.38 gpm (0.0 - 1.44 L/min)
Solution Control Settings Manual Trigger
Scrubbing System
Cleaning Path 12 in (30.5 cm)
Pad/Brush Size 12 in (30.5 cm) Brush
Scrub Head Height 3.6 in (9.2 cm)
Handle Height 55.5 in (141 cm)
Recovery System
Recovery Tank Capacity 6 gal (22.7 L)
Recovery Tank Accessibility Full Clean-Out Access
Vacuum Motor 210 W, Single Stage
Vacuum Motor cfm/cmm 55.7 cfm (1.58 cubic m3/min)
Vacuum Motor Water-lift 29.8 in (75.5 cm)
Squeegee Width 12 in (30.5 cm)
Squeegee Material Primothane®
Battery System
System Voltage 12 V
Battery Amp/Hour Rating (Std) 26 Ah
Battery Run Time (Std) Up to 1.4 hours
Battery Amp/Hour Rating (Opt’l) 61 Ah
Battery Run Time (Opt’l) Up to 3.5 hours
Charger Description On-Board
*Note: Specifications subject to change without notice
Toggle to View Specs

Model Specifications: Pacific QS-12 QUICK SCRUB

6 GALLON QUICK SCRUB SPECIFICATIONS
Features Specifications
Model QS-12
Machine Specifications
Length 24 in ( 61 cm)
Width 19 in ( 48.3 cm)
Height 36 in ( 91.4 cm)
Weight w/ Std Batteries 110 lbs (49.9 kg)
Weight w/ Opt’l Batteries 131 lbs (59.4 kg)
Sound level 68 dBA
Construction Rotationally molded polyethylene tanks, powder coated steel frame
Solution Delivery System
Solution Capacity 5.5 gal (20.8 L)
Solution Control 0.0 – 0.38 gpm (0.0 – 1.44 L/min)
Solution Control Settings Manual Trigger
Scrubbing System
Cleaning Path 12 in (30.5 cm)
Pad/Brush Size 12 in (30.5 cm) Brush
Scrub Head Height 3.6 in (9.2 cm)
Handle Height 55.5 in (141 cm)
Recovery System
Recovery Tank Capacity 6 gal (22.7 L)
Recovery Tank Accessibility Full Clean-Out Access
Vacuum Motor 210 W, Single Stage
Vacuum Motor cfm/cmm 55.7 cfm (1.58 cubic m3/min)
Vacuum Motor Water-lift 29.8 in (75.5 cm)
Squeegee Width 12 in (30.5 cm)
Squeegee Material Primothane®
Battery System
System Voltage 12 V
Battery Amp/Hour Rating (Std) 26 Ah
Battery Run Time (Std) Up to 1.4 hours
Battery Amp/Hour Rating (Opt’l) 61 Ah
Battery Run Time (Opt’l) Up to 3.5 hours
Charger Description On-Board

*Note: Specifications subject to change without notice

PACIFIC

QS-12 QUICK SCRUB References


QS-12 QUICK SCRUB

REPLACE THE MOP & BUCKET

The Quick Scrub replaces the mop, bucket, and wringer and the need for scheduled restorative cleaning. Featuring patent pending innovations for increased speed and performance, this daily clean machine is the industry’s only solution to cleaner, safer, and soil-free tight space environments.
View Brochure Flipbook

Operations and Parts Manual

Model 805403 Pacific QS-12 Premium shown

Available Accessories

Item Number: Description:
805009KIT BRUSH AND HANDLE ASSEMBLY
805006KIT PAD HOLDER ASSEMBLY
805005KIT BRUSH ASSEMBLY
805004KIT SQUEEGEE ASSEMBLY REPL
877007PUCK BROMINE 4PACK
555945PAD 5IN X 12IN RED SCRUB CASE 5
555955PAD 5IN X 12IN BLUE SCRUB CASE 5
555905PAD 5IN X 12IN BLACK SCRUB CASE 5
565934PAD 5INX12IN ECOCARE CASE 10
801501QCaps Industry 2.7oz 30pk
801502QCaps Enzysan 2.7oz 30pk
801503QCaps Linpol 2.7oz 30pk
801504QCaps Variety 4 Pack (2 Enzy, 2 Ind)

GENUINE SERVICE PARTS

PURPOSE BUILT TO PROVIDE MAX PERFORMANCE

Why buy a copy when you can get the original parts – the ones actually used in the machine’s original design work the best. Not only do you get maximum performance, but you also reduce hassle and downtime. Be sure to contact Pacific Floorcare or a local authorized distributor when you need authentic service parts.